SECTORS
Mining
Wear and tear, the use of corrosive chemicals or electrolytic processes that generate aggressive environments, progressively degrade mining equipment and installations.
A poor condition of equipment poses safety risks and also has a negative economic impact on the activity.
Steel and concrete protection systems of great durability, resistance to corrosion, abrasion and chemical attack with optimum adherence to the support are therefore required.
ACE COATINGS provides the mining industry with coating solutions based on polyurea technology that will contribute to:
- extend the service life of the installations
- minimising maintenance actions, and
- avoid costs and downtime.
Polyureas are synthetic polymers which, when sprayed with hot high-pressure equipment, create in seconds continuous and elastic membranes totally adhered to the substrate with excellent mechanical performance and chemical resistance.
With this environmentally friendly technology, we formulate 100% solvent and CFC-free, highly durable systems that do not require specific maintenance actions.
APPLICATION AREAS
Structures, machinery and equipment
- Interior of cells, thickeners and chutes.
- Containment ponds and accumulators.
- Chutes, chutes, trommels,
- Mills
- Separation/sorting machinery, screens, screens, screens, hoppers and screens.
Elements of transport
Wagons, trucks (exterior, underbody and tipper) protecting the sheet metal from impact, wear and chemical attack.
Floors
Exterior or interior
- In warehouses and workshops to have a continuous flooring with crack bridging capacity and high mechanical resistance and resistance to chemical spillage that facilitates the transit of machinery and avoids generating dust.
- They allow anti-slip finishes that comply with UNE ENV 12633:2003.
- Chutes, trommels,
- On the outside to allow transit, avoiding possible filtration of contaminants into the ground and floors under cells.
Pipelines
Coating of abrasive or water transport pipes; when seawater is used the coating will protect the concrete from salt corrosion, minimise the adhesion of molluscs and algae thus reducing the cost of chlorine consumption while maintaining adequate water flow.
Water ponds
For the containment of water or to prevent environmental damage due to the seepage of certain fluids into the ground.
UNE EN 1504 2-9-10
They comply with UNE EN 1504-2-9 and 10 as concrete protectors with Class I chemical resistance: to sulphuric acid, salts, acetic acid,…
C5I y CM5 High
Our systems are corrosion characterised as C5I and C5M High according to ISO 12944-6: 2005; they are therefore resistant to condensation, salt spray, and permanent immersion in seawater and various chemicals.
ETE W3
Certified with European ETEs as liquid roof waterproofing for severe climates (substrates -20ºC to 90º) for an estimated service life of 25 years based on ageing by heat, water immersion and UV radiation QUV chamber.
ADVANTAGES of ACE coatings for mining
High resistance to abrasion and chemical attack
Coatings capable of mitigating the wear caused by the mineral which, combined with special aggregates, make it possible to obtain elements with high resistance to abrasive wear and durability.
Fast commissioning
They can be applied both in-situ on mine sites and in workshops and the speed of curing of the coating allows for almost immediate return to service of equipment or transport of treated parts to the warehouse on the same day of application.
Any thickness
They can be applied in any thickness up to 10cm in a single application, curing in minutes.
Efficient on seismic ground
Severe climates
IMAGE GALLERY
RELATED WORKS
